Aquaseal + FD Flexible Durable Adhesive

Aquaseal FD is a clear, waterproof adhesive that quickly repairs outdoor gear. It offers excellent abrasion resistance and cures to a flexible rubber glue.

Ideal For:

• Repairing rips and tears in drysuits, jackets, waders, and inflatables

• Creating permanent, flexible seals on neoprene, nylon, GORE-TEX, and vinyl

• Making waterproof repairs that hold up to repeated use and wear

Description

Repair all types of gear failures with Aquaseal FD. It’s a clear, waterproof urethane adhesive that comes in a handy 0.75 oz tube. After it cures, it becomes a flexible, rubber glue that is ideal for fixing outdoor gear that’s in constant motion. It also offers excellent abrasion resistance. So, when fishing waders rip on the river or a wetsuit tears while diving through prickly corals, don’t throw it away. Fix it with Aquaseal FD. It’s also useful as a seam sealer. Don’t let rips, tears, and holes stop you. Patch it up with the all-purpose Aquaseal FD and stay dry.

Specification

Material: Thermoset urethane

Sizes: 0.25 oz (Multipack), 0.75 oz, or 8 oz

Adheres To: Neoprene, rubber, nylon, canvas, vinyl

Cure Time: 8-12 Hrs (2 Hrs with Cure Accelarator)

Application Temperature: 60° to 100°F (Above 40% relative humidity)

Use Temperature: -20° to 180°F

Storage: Store in bag in freezer

Made in USA

Learn how Aquaseal FD Works

Step 01

Clean and prep the area. Thoroughly clean and dry the surface around the tear. Remove dirt, oils, and debris to ensure the adhesive bonds well.

Step 02

Apply Aquaseal FD. Squeeze a thin, even layer of Aquaseal FD over the tear or hole. Use a brush or applicator to spread it slightly beyond the damaged area.

Step 03

Let it cure. Lay the item flat and allow the adhesive to cure for 8–12 hours. For faster results, use Cure Accelerator to speed up the dry time to about 2 hours.

Step 04

Get back out there. Once fully cured, the flexible, waterproof seal is ready for action — so your gear is too.